10/01/2011

PERMAGLIDE products, distributed in Italy by GETECNO!

The plain bearings PERMAGLIDE are high quality and high-performance products, certified by leading automotive, aerospace and defense manufacturers, and they are already well known to leading OEM manufacturers in Italy. Smooth bushings, flanged bushings, and anti-friction strips PERMAGLIDE are original products KS Gleitlager GmbH, Kolbenschmidt Pierburg group, which recently implemented its sales channel in Italy, now also through GETECNO.

(click the image to download the products overview or go to Catalogues page to download the complete catalogue)

13/12/2010

GETECNO - THE WORLD OF ROD ENDS

GETECNO is a company's specializing in rod ends: we have visited their premises to understand how they create value in such a specialized niche... (click HERE or the image to the right to read article in .PDF format)

published by NAUTIC SERVICE, ed. COLLINS

06/12/2010

NEW EDITION CATALOGUE AURORA BEARING COMPANY

AURORA BEARING COMPANY has announced the availability of its latest product catalogue, with content that goes far beyond just product listings. The new catalogue features all the company's newest product offerings, as well as the top quality legacy components that have made Aurora a worldwide leader in quality and long-lasting bearing products since 1971. The 83-page publication is a graphically enhanced technical resource that will assist engineers in designing with, and specifying, motion transfer components from Aurora's product line, including its mil spec offerings.

The catalogue is available by the distributor in Italy Getecno srl and downloadable in pdf format in ''catalogues'' section.

01/02/2010

ABC on the accuracy of rod ends and spherical bearings

We release a video explaining the characteristics of the AURORA components... (click HERE or the image to the right to see the movie. wmv, 20.5MB)

from AURORA website

01/02/2010

THE ELECTROHYDRAULIC STEERING WHEEL IN THE OPINION OF MARSILI

The power steering is now used on many boats, but often we can have problems in the use of two blades that can not be interconnected. We analyze the MARSILI solution... (click HERE or the image to the right to read article in .PDF format)

published by NAUTIC SERVICE, ed. COLLINS

01/12/2009

INTERVIEW WITH RENE 'RAIS, COMMERCIAL DIRECTOR

Getecno operates on very different market segments, commercialize 6 main lines of products and provides approximately 3500 users in over 30 countries. With regard to product lines in Getecno deals for longer, we are already appreciated as specialists in the international markets... (click HERE or the image to the right to read article in .PDF format)

published by MACCHINE UTENSILI, ed. TECNICHE NUOVE

01/12/2009

COMPANIES OF THE THIRD MILLENNIUM: GETECNO SRL

Formed in 1983, with headquarters in Genoa, Getecno Srl is a commercial firm that takes care of the exclusive distribution, national and international (over 30 European and non-Europeans countries), of mechanical components for the transmission of forces and movements. Its product lines are characterized... (click HERE or the image to the right to read article in .PDF format)

published by MACCHINE UTENSILI, ed. TECNICHE NUOVE

01/12/2009

QUALITY ORIENTED

By vocation Getecno has always been dedicated to the transmission systems, characterized by good quality and offered in diversified construction ranges. Words of Rene Rais... (click HERE or the image to the right to read article in .PDF format)

published by OLEODINAMICA PNEUMATICA, ed. TECNICHE NUOVE

01/12/2009

ABC OF ROD ENDS AND SPHERICAL BEARINGS

The components used in industrial applications are designed with an anti-friction insert in order to reduce friction and to meet optimally the needs in all types of fittings with rotation movements... (click HERE or the image to the right to read article in .PDF format)

from AURORA website

01/12/2009

ROD ENDS DAMAGED

This article is a analysis on broken components and their quality... (click HERE or the image to the right to read article in .PDF format)

from AURORA website

01/12/2009

EXPERTS IN THE TRANSMISSION OF FORCE AND MOTION

Getecno is distributor in Italy and in over 30 foreign countries of components for power transmission - including rod ends, couplings and variable distance units - used in industrial equipment, automated machinery, machine tools and boats. The product range available is outstanding for completeness and quality. (click HERE or the image to the right to read article in .PDF format)

published by ORGANI DI TRASMISSIONE, ed. TECNICHE NUOVE

01/12/2009

IN ROD WE TRUST!

We analyze the rod ends in general, and we wonder why it is so important not to undervalue the role they play... (click HERE or the image to the right to read article in .PDF format)

from AURORA website

01/12/2009

AURORA: EXPERTS IN THE TRANSMISSION OF FORCE AND MOTION

The parts produced by Aurora Bearing Company are present in the races at Indy, in flying missions over Iraq, were drifting on the surface of Mars, and are flying with the Cassini spacecraft studying the rings of Saturn and its moon, Titan... (click HERE or the image to the right to read article in .PDF format)

from AURORA website

01/12/2009

ROD ENDS: EASY TO FORGET, UNTILL THEY BREAK

Here is an article that appeared in various publications, which wants to provide a deeper insight on rod ends and spherical bearings... (click HERE or the image to the right to read article in .PDF format)

from AURORA website

30/11/2009

ROD ENDS: WHAT YOU NEED TO KNOW

The rod ends are an important element with characteristics that the driver often takes for granted. And more often assume that the rod ends are all the same... (click HERE or the image to the right to read article in .PDF format)

from AURORA website

27/11/09

NEW SPHERICAL BEARINGS RODOBAL MOTORSPORT "NARROW SERIES"

New RODOBAL spherical bearings for MOTORSPORT applications, DIN 648 G series, HIGH MISALIGNMENT type.

The technical information are in multilingual datasheet, available from the distributor in Getecno srl, Italy and also downloadable in .pdf format HERE or by clicking on the beside image.

22/04/2009

ROLLOUT JR09!

On May 8th, 2009 the team of Joanneum Racing Graz will present its newest racecar the JR09!

After seven months of hard work, it is time to make the big step: the car can leave the garage!

Congratulations!

GETECNO IS JOANNEUM RACING GRAZ SUPPLIER

21/01/2009

Products overview Motorsport - 2009

The MOTORSPORT’s Products overview 2009 of the two constructors AURORA and RODOBAL is now available.

The catalogue, translated in Italian, English, French and Deutsche, is available by vendor Getecno srl and downloadable in .pdf format directly from the ''catalogues'' section in GETECNO website.

28/05/2008

RULAND yellow zinc plated shaft collars

Marlborough, Massachusetts, May 2008. Ruland is now offering lead-free carbon steel shaft collars with RoHS compliant yellow zinc plating. The zinc plating offers good anti-corrosive properties yet these shaft collars are less expensive than stainless steel alternatives. All of Ruland’s yellow zinc parts are plated using a RoHS compliant trivalent process instead of the non-compliant hexavalent process.

Zinc plated shaft collars have less holding power than their black oxide finished carbon steel counterparts. This is due to the reduced coefficient of friction caused by the zinc plating. However, performance of zinc plated parts that utilize plated, high strength alloy steel hardware is still greater than that of stainless steel parts whose holding power suffers from the lower physical properties of stainless steel screws. To meet the application’s specific requirements, Ruland offers collars in a variety of materials including type 303 stainless steel, type 316 stainless steel for increased corrosion resistance, aluminum, black oxide carbon steel and engineered plastic.

The shaft collars are available in one- and two-piece clamp-style designs with bore sizes from 1/8'' to 6'' in the inch series and 3mm to 80mm in the metric series. Clamp-style collars do not mar the shaft, provide higher holding power, and are more easily adjustable when compared to set screw type shaft collars. All Ruland shaft collars are manufactured with high face to bore perpendicularity. Precise shaft collar face to bore relationship ensures that components are both properly positioned and not tilted on the shaft. Collar face perpendicularity also ensures even pressure on interfaced components.

Shaft collars are part of Ruland’s complete product line which also includes rigid couplings with precision honed bores and five types of zero-backlash motion control couplings: beam couplings, bellows couplings, oldham couplings, jaw couplings and miniature disc couplings.

24/04/2008

PRODUCTS SUMMARY MOTORSPORT 2008

The summary of MOTORSPORT’s Products 2008 of the two constructors AURORA and RODOBAL is now available.

The catalogue, translated in Italian, English, French and Deutsche, is available by vendor Getecno srl and downloadable in pdf format directly from the ''catalogues'' section in GETECNO website.

24/04/2008

RULAND FLEXBEAM CATALOGUE IS AVAILABLE

New edition of RULAND FLEXBEAM catalogue is available.

Flexible beam couplings are worked from a single piece of aluminum or stainless steel and featured with the characteristic multiple spiral cuts. The multiple cut design provides higher torsion capabilities and greatly reduce the wind-up compared to commodity-type single beam couplings…

The complete technical information are introduced in Italian version, available by the Italian distributor Getecno srl and downloadable in pdf format in the ''catalogues'' section of GETECNO website.

24/04/2008

Formula SAE

We have the pleasure to publish the picture of 2007 car of the first Italian Formula SAE to have participated to an American event (Formula SAE West).


THANKS TO FIRENZE RACE TEAM V2, our valued customers, and...

CONGRATULATIONS!!!

09/01/2008

GETECNO COMPONENTS IN SWEDEN DISTRIBUTION

Getecno has a great distribution point in Sweden: It’s MecMove distributor, in Nynäshamn, approximately 30 km south of Stockholm.

MecMove receives most frequent supplies from Getecno and has a very well organized structure and technical experience in order to follow at the top constructors and workshops in Sweden, not only in motorsport division, but also in the various industrial fields.

www.mecmove.se

09/01/2008

NEW EDITION CATALOGUE RULAND

The new RULAND catalogue edition for shaft collars and couplings is available. It has been completed with the new series of double-wide shaft collars.

The complete technical information are introduced in Italian version, available by the distributor in Italy Getecno srl and downloadable in pdf format in ''catalogues'' section in GETECNO website.

09/11/2007

Partnership between GETECNO and RULAND consolidate

RULAND MANUFACTURING CO, INC., since 1937, produced many types of quality components for advanced technical requirements.

In the past, in the range of the high pressure valves for spatial purposes, they produced also the astronaut’s pressurized coveralls valves, already used for the first walks in the space.

From the 1970’s RULAND has been concentrated on the production of a program of mechanical components, of which shaft collars and couplings, developing and applying different surface treatments methods, precision works and vibrations damping.Technical qualities, reliabilities and varieties of types and sizes have carried RULAND components to a large use in the international industry. With the RULAND brand, GETECNO demonstrates its firm will to increase the range of products for distribution.

08/11/2007

AURORA ENGINEERING LIBRARY

Our technical catalogues, which are downloadable from our web site, or can be sent by mail on request, reflects a large part of our standard product line. An additional number of special parts is available but not shown in our present catalogues. We will be pleased to provide further information and details.

We inform that CAD drawings of the mechanical components shown in our RODOBAL, RODOFLEX, RODOGRIP and RODOSET catalogues are available under Cadenas technology for users of the following libraries:

- AUTODESK Supplier Content Center: 1,4 mln users

- Portal components PTC: 370.000 users

- Portal components ALIBRE@: 106.000 users

- AXEMBLE (SolidWorks Alliance Community): 25.000 users

- Portal components PARTserver di CADENAS: 800.000 users

and in native format of the main CAD system (Catia, SolidWorks, SolidEdge, U.G., Cadra, etc.)

For AURORA rod ends and spherical bearings we will be pleased to send a CD-ROM containing .pdf catalogues and CAD library generation software and export option of drawings and model in most popular CAD formats.

Get this CD-ROM free, please mail to info@getecno.it

25/11/2003

TECHNICAL SPONSOR OF Italian team Formula Student

Getecno is supplier for rod ends and spherical bearings used by Firenze Race Team V2, builder of the racecar to be used in the international competitions Formula Student in England and Formula SAE in the US.

On November 15, at the International Mugello race circuit, the team has presented its acitivty, the racecar and the schedule for 2004.

More information about Firenze Race Team V2 on http://firenzerace.too.it